News

XINYU ELECTRICAL

News

  • Mechanical Requirements for Enameled Wires

       In the process of winding the enameled wire into a coil and a ruled wire, the Enameled Wire and the jig and the enameled wire are rubbed against each other and subjected to stresses such as bending, stretching or compression. Therefore, the paint film of the enameled wire is required to have good...

    01-07-2020
  • Enameled Wires Are Widely Used in Various Motors

       Acetal enameled wire; thermal grades of 105 and 120, with good mechanical strength, adhesion, resistance to transformer oil and refrigerant resistance, but the product has poor moisture resistance, low thermal softening breakdown temperature, durable benzene-alcohol mixed solvent Defects such as ...

    01-07-2020
  • Enameled Wire Brings More Convenience to People’s Life

    A method and apparatus are provided for painting a copper flat wire turbine system into a mold. The amount of liquid coating applied to the finishing die is determined by the size of the pores. Each time so much paint design can be selected by the best size, plus the wear resistance of the mold mate...

    01-07-2020
  • Notes on the Purchase of Enameled Wire

         The Enameled Wire has a thin insulating coating made of copper or aluminum. The main reason for this is to prevent the occurrence of a short circuit. To purchase this type of enameled wire on the market, you must choose a reliable manufacturer that only provides products that meet the quality s...

    01-07-2020
  • Xinyu Enameled Wire Gives Our Quality Life

    When the paint line protrudes from the felt, a gravity effect is also produced during the painting process. If the rounding time is short, the olive-shaped sharp corners will quickly disappear, the gravitational effect will be short, and the conductor coating will be uniform. If the wire size is sma...

    01-07-2020