Global News

Polyimide Insulated Copper Enameled Wire ( Brief of Introduction)

Update:22-08-2018
Summary:

The professional Enameled Copper Wire manufacturer - xi […]

The professional Enameled Copper Wire manufacturer - xinyu-enameledwire offer different types of enameled copper wire, this article introduce the Polyimide Insulated Copper Enameled Wire.

Main Features of Polyimide Insulated Copper Enameled Wire

1) Good conductivity

2) Directly soldering

3)Good chemically resistance

4)Excellent thermal stability

5) High solvent resistance

Advantages of our Magnet copper wire

• High quality and low price

• Perfect,Timely after-sales service

• Sweet safe packing are available

• Professional production and sales Team

• Double or Three Type Insultaions covered wires

• NEMA/IEC/JIS/GB and any Local Standards approved

Magnet wire is a copper wire covered with thin insulation. It is used in the construction of transformers, inductors, motors and electromagnets; among other applications. However, it is not magnetic itself.

The wire itself is most often fully annealed, electrolytically refined copper. Aluminum magnet wire is sometimes used for large transformers and motors. However, because of its lower electrical conductivity, an aluminum wire must have 1.6 times the cross sectional area as a copper wire to achieve comparable DC resistance. Smaller diameter magnet wire usually has a round cross section. Thicker magnet wire is often square or rectangular (with rounded corners) to permit more efficient use of available winding space. Older insulation materials consisted of cotton, paper or silk and were useful for lower temperature applications (up to 105°C). Modern magnet wire typically uses one to three layers of polymer film insulation, often of two different compositions, to provide a tough, continious insulating layer.

Magnet wire insulating films use (in order of increasing temperature range) polyurethane, polyamide, polyester, polyeseter-polyimide, polyamide-polyimide (or amide-imide), and polyimide. Polyimide insulated magnet wire is capable of operation at up to 250°C. The insulation of thicer square or rectangular magnet wire is often augmented by wrapping it with a high-temperature polyimide or fiberglass tape, and completed windings are often vacuum impregnated with an insulating varnish to improve insulation strength and long-term reliability of the winding.

Application of Polyimide Insulated Copper Enameled Wire:

Mainly use to different kinds of Motors,Transformers, Electronic compoment ,instrument windings ,communication equipment ,step motors , Refrigerator rating compressors .. Ballast , Home appliance product. High heat-resistant electrical.